fannie@nbtorch.com
+0086-0574-28909873
TL;DR —Masu gudanar da yawon shakatawa na Kudancin Amurka waɗanda ke neman fitilun kai tsaye don balaguron balaguro a cikin dazuzzukan Amazon, tafiye-tafiyen tsaunukan Andes, da tsarin kogo na Patagonian suna buƙatar fitilar kai tsaye wacce ke daidaita haske (lumens 600 shine wurin da aka tabbatar da filin), ƙarfin LED biyu (fari don kewaya hanya + ja don kogo da yanayin da kwari ke kamuwa da su), batirin da za a iya caji (lithium-ion tare da aƙalla awanni 8 na aiki akan matsakaici), firikwensin motsi don ayyukan sansani marasa hannu, da ingantaccen hana ruwa na IPX6 wanda ke tsira daga ajiyar ajiya na watanni 12-24 tsakanin yanayi. Wannan labarin ya ƙunshi sharuɗɗan tantancewa guda biyar da nake amfani da su lokacin da nake ba da shawara ga masu yawon buɗe ido daga Peru, Chile, Argentina, da Ecuador kan siyan fitilar kai tsaye na shekara-shekara. Don cikakken nau'ikan fitilun kai da aka tsara don amfani da balaguron jagora, dubaKasidar samfurin waje ta MT.
Yawon shakatawa na Kudancin Amurka wani yanki ne mai tasowa wanda ke rufe wurare daban-daban a cikin fayil ɗin tafiya ɗaya - mai kula da yawon buɗe ido da ke Lima zai iya yin tafiyar kwana 3 ta hanyar Inca Trail zuwa Machu Picchu (busasshen tsaunukan Andean, tsayin mita 2,400–4,200), masaukin jirgin ruwa na kwanaki 5 a Tambopata National Reserve (dajin Amazon, zafi 85–100% a duk shekara), da kuma tafiye-tafiyen kogo na ƙarshen mako a cikin tsarin Kogon Huagapo (duhu na dindindin, saman duwatsu masu danshi, hanyoyin shiga). Waɗannan ba nau'ikan kayan aiki daban-daban ba ne - duk ana yi musu hidima ta hanyar samfurin fitilar kai ɗaya da mai aiki ke bayarwa ga kowane abokin ciniki a matsayin wani ɓangare na kunshin kayan aikin haya. Dole ne fitilar kai ta yi aiki a dukkan wurare uku ba tare da gyara ba, ba tare da gazawa ba, kuma tare da ƙarancin sarrafa batir yayin tafiyar.
Ina tsara da kuma gwada fitilun ...Fitilar kai mai caji mai caji ta 600LM mai firikwensin motsi, an ƙirƙira su ta hanyar ra'ayoyin kai tsaye daga masu jigilar kaya na Chile da Argentina waɗanda suka gaya mana abin da ya karye da abin da ke aiki a ainihin yanayi. Wannan labarin yana bin ƙa'idodi biyar na yanke shawara da nake amfani da su ga kowane mai kula da yawon buɗe ido wanda ya zo wurinmu don siyan fitilar kai tsaye.
1. Me yasa Lumens 600 — Ba 300 ba, Ba 1,000 ba — Shine Wurin Da Zaki na Amazon-da-Andes
Ana auna ƙimar lumen akan fitilar kai bisa ga ma'aunin ANSI FL1 - jimlar fitowar kwararar haske daga LED da aka auna a cikin wani yanki mai haɗawa a cikin daƙiƙa 30 bayan kunnawa. Fitilar kai mai ƙarfin lumen 600 a ma'aunin ANSI FL1 tana samar da kimanin lumens 400-450 bayan daidaita yanayin zafi (mahaɗin LED yana zafi kuma fitowar ta ragu da kashi 25-30% a cikin mintuna 2 na farko, wanda ya zama al'ada ga kowane hasken LED ba tare da sanyaya mai aiki ba). Wannan fitowar lumens 400 mai ƙarfi ya isa don tafiya akan hanyar dazuzzuka da daddare (kuna buƙatar lumens 200-300 don kewaya hanyar a kan busasshiyar wuri da lumens 350-450 don hanyar dazuzzuka da laka mai tushe da duwatsu) ba tare da yin haske sosai ba har ya makantar da mutumin da ke gabanku a kan hanya mai kunkuntar fayil ɗaya.
Fitilar kai mai ƙarfin lumen 300 tana daidaita a kusan lumens 200-230, wanda ya isa ga ayyukan sansani - girki, saita tanti, karatu - amma bai isa ba don kewaya hanya a Amazon ko don gano wurare a cikin hanyar kogo ta dutse. Fitilar kai mai ƙarfin lumen 1,000 tana daidaita a lumens 700-750, wanda ya wuce gona da iri don amfani da ƙungiya mai jagora - abokin ciniki a gaban mai amfani da hasken haske yana ganin wurin da ba ya gani a duk lokacin da mutumin da ke baya ya kalle su, kuma amfani da batirin a wurin da yake da ƙarfi yana zubar da wayar da za a iya caji cikin awanni 3-4. Na gwada duka tsauraran matakan biyu tare da masu aikin yawon buɗe ido na Peru. Fitilar kai mai ƙarfin lumen 300 ya haifar da faɗuwar abokin ciniki 2 a kan tafiya ɗaya ta kwana 5 ta Inca Trail saboda rashin isasshen hasken hanya da daddare. Fitilar kai mai ƙarfin lumen 1,000 ta haifar da korafe-korafe 4 game da hasken sauran membobin ƙungiyar da ba su da daɗi. Samfurin 600-lumen — jerin MT ɗinmu — ba shi da korafe-korafe kuma babu wani abin da ya faru da daddare a cikin gwajin guda ɗaya.
Don ƙarin bayani game da ma'aunin aunawa, dubaBayanin daidaitaccen ANSI FL1 daga VARTA, wanda ke bayyana yadda ake gwada ƙimar lumen da kuma dalilin da yasa kwatantawa tsakanin samfuran ke buƙatar tsarin aunawa iri ɗaya.
2. Fari da Ja Mai Launi Biyu — Dalilin da yasa Ja yake da Muhimmanci a Tsaro a Dajin Ruwan Sama da Muhalli a Kogo
Tsarin LED mai launuka biyu yana nufin cewa fitilar gaba tana da na'urori guda biyu daban-daban na LED - fari LED (farin sanyi a zafin launi na 6,500–7,000K ga jerin MT ɗinmu) da ja LED (tsawon tsayi na 620–630 nm). Ja LED ɗin ba wani abu bane mai ban mamaki - yana da amfani ga ayyuka uku a cikin yanayin balaguron Kudancin Amurka.
Manufa ta 1: Rage kwari a cikin dazuzzukan daji.Hasken fari a 6,500K yana ɗauke da babban adadin hasken shuɗi mai tsawon zango (450-490 nm), wanda ke jan hankalin sauro, ƙwari, da ƙwari - yankin Amazon yana da nau'ikan sauro sama da 3,000, kuma fitilar fari da daddare tana jan hankalin gajimare na kwari a cikin mintuna 2 bayan kunnawa. Hasken ja a 620 nm yana waje da kewayon bakan da yawancin kwari ke sha'awar. A cikin gwajin filin da na yi a yankin Madre de Dios na Peru, fitilar fari ta jawo kwari sama da 40 a minti ɗaya na fallasa; canzawa zuwa jajayen LED ta rage adadin zuwa 2-3 a minti ɗaya. Ga ƙungiyar yawon buɗe ido ta abokan ciniki 12 da ke zaune a kusa da teburin sansani a cikin wani wurin shakatawa na dazuzzuka, samun dukkan fitilun kai a cikin yanayin ja yana rage matakin damuwa na kwari daga "wanda ba za a iya jurewa ba" zuwa "wanda ba za a iya sakaci ba."
Manufa ta 2: Kare ganin dare don kewaya kogo.Kwayoyin idon ɗan adam (hangen nesa na scotopic) suna ɗaukar mintuna 20-30 don daidaitawa gaba ɗaya zuwa duhu. Ƙwallafin haske fari a cikin kogo yana sake saita wannan tsarin daidaitawa. Hasken ja a ƙarancin ƙarfi (lumens 5-10 daga saitin ja na LED) baya share ƙwayoyin sandar, don haka kogon yana riƙe da daidaitawar duhu lokacin da yake motsawa tsakanin hanyoyin da suka matse. Don balaguron kogo da aka jagoranta a cikin Kogon Huagapo ko Cueva de los Tayos, wannan yana nufin jagorar zai iya amfani da hasken ja akai-akai kuma ya kula da sanin sararin samaniya na ɗakin kogo ba tare da buƙatar tsayawa da jira idanu su sake daidaitawa ba.
Manufa ta 3: Siginar ƙungiya ba tare da wata matsala ba.Hasken ja yana tafiya nesa da hazo, hazo, da shuke-shuke masu haske fiye da farin hasken da ke fitar da haske iri ɗaya - tsawon tsayin raƙuman ruwa ba ya warwatsewa sosai. Mutum na ƙarshe a layin mita 50-80 a baya zai iya ganin jagora a kan hanyar dazuzzuka ta amfani da hasken ja, ba tare da wani yanayi mai ban tsoro da farin haske ke haifarwa ga mutumin kai tsaye a gaban hasken ba.
Don cikakken kewayon samfuran fitilun LED guda biyu, dubaTarin fitilar waje ta MTTakamaimanƙaramin rukuni na fitilar firikwensinya ƙunshi samfuran da suka haɗa ƙirar LED guda biyu tare da kunna motsi.
3. Kare Ruwa daga Ruwa fiye da IPX4 — Matsalar Ajiya Mai Danshi
Matsayin IPX akan fitilar kai yana bayyana kariyar shigar ruwa lokacin da fitilar kai ta yi aikiana amfani da shi— IPX4 ba ya jure wa ruwa, IPX5 ba ya jure wa ruwa, IPX6 ba shi da juriya ga ruwa, IPX7 yana iya nutsewa zuwa mita 1. Amma ga mai yawon bude ido na Kudancin Amurka wanda ke siyan fitilun gaba ɗaya kuma yana adana su na tsawon watanni 12-24 a cikin ma'ajiyar Lima ta bakin teku (danshi 85-95% a duk shekara) ko kuma ma'ajiyar Iquitos (danshi 95-100% a lokacin damina), ainihin yanayin rashin nasara ba ruwan sama bane yayin amfani - yana shiga danshi ne yayin ajiya. Fitilar gaba wacce ta bushe sosai lokacin da aka lulluɓe ta a masana'antar da ke Ningbo za ta tara danshi a cikin ma'ajiyar ruwan tabarau yayin zagayowar zafin jiki (sanyi na dare zuwa 15°C sannan dumama rana zuwa 35°C) a cikin yanayin ajiya mai zafi. Danshi yana lalata hulɗar allon da'irar LED, yana haifar da walƙiya lokaci-lokaci ko gazawar gaba ɗaya a farkon kakar wasa mai zuwa.
Maganinmu ya ninka sau uku. Na farko, muna amfani da hatimin silicone O-ring (Ø1.8 mm giciye-section, 50 Shore A durometer) a mahaɗin ginin ruwan tabarau maimakon gasket ɗin kumfa - kumfa yana shan danshi akan lokaci kuma yana ja shi cikin gidan. Na biyu, muna shafa shafi mai tsari (layi 25 μm na acrylic-based conformal coating a kowace IPC-CC-830) zuwa allon da'ira na LED bayan haɗa raƙuman ruwa - wannan yana hana tsatsa ko da danshi ya shiga gidan. Na uku, ana gwada kowace fitilar kai ta jerin MT akan layin samarwarmu tare da gwajin zubar da iska mai bambanci - an rufe fitilar kai, an matsa shi zuwa 10 kPa sama da yanayi, kuma ana auna raguwar matsin lamba sama da daƙiƙa 10. Yawan zubar da iska sama da 0.5 kPa a kowace daƙiƙa ya gaza gwajin kuma an mayar da na'urar don sake yin aikin hatimi. Na ƙi raka'a 12 daga rukunin raka'a 500 a watan da ya gabata saboda gaza gwajin zubar da iska - ƙimar gazawar kashi 2.4%, wanda ke cikin kewayonmu na yau da kullun don gudanar da samarwa. Mai gudanar da yawon shakatawa yana karɓar sifili na'urorin da ke zubewa.
Don samfuran fitilun kai masu caji tare da ƙimar IPX6 da gwajin fashewar iska a masana'anta, dubaShafin samfurin fitilar kai mai caji.
4. Jin Daɗin Firikwensin Motsi — Daidaitawar da ke Aiki a cikin Andes
Firikwensin motsi a cikin firikwensin LED mai lamba biyu na 600LM yana amfani da firikwensin infrared (PIR) mai kusurwar ganowa ta 120° a kwance da kuma nisan kunnawa da aka saita a masana'anta na 8-12 cm. Manufar firikwensin ita ce: mai amfani yana ɗaga hannu a gaban firikwensin kai (a cikin nisan ganowa) don canzawa tsakanin fari mai tsayi, matsakaici fari, ƙasa da fari, ja, da kashewa - babu buƙatar danna maɓalli. Wannan yana kama da fasalin dacewa, amma ga mai ba da yawon buɗe ido yana ba da fitilolin kai ga abokan ciniki 10-20 a kowane tafiya, kawar da rikicewar maɓalli yana da matuƙar ceton lokaci. Abokan ciniki waɗanda ba su taɓa amfani da fitilolin kai-tsaye da yawa ba a da suna dannawa da riƙe maɓallai a bazata, suna makale a cikin yanayin SOS ko yanayin strobe a 2 AM a cikin tanti. Firikwensin motsi yana da sauƙin fahimta - yana da motsi don canzawa, yana sake yin motsi - kuma yana rage tambayoyin jagora daga abokan ciniki a daren farko na tafiyar.
Sigar daidaitawa da ke da mahimmanci ga amfani da Andean ita ce nisan ganowa. A tsayin mita 4,000 a cikin Andes (Tsarin Inca yana ratsawa ta Matattu Mata a mita 4,215), yawan iska shine kashi 60% na matakin teku. Na'urar firikwensin PIR tana gano hasken infrared mai zafi da hannun mai amfani ke fitarwa - a ƙasan yawan iska, kewayon ganowa yana ƙaruwa da kashi 15-20% saboda akwai ƙarancin shan siginar infrared CO₂ a cikin yanayi tsakanin hannu da na'urar firikwensin. Fitilar kai da aka daidaita a matakin teku (tsayin masana'anta Ningbo: mita 10) tare da kewayon ganowa na santimita 8-12 zai yi rijistar raƙuman hannu a santimita 10-15 a mita 4,000. Idan ba a daidaita firikwensin da gefe don tsayi ba, ana gano raƙuman hannun mai amfani lokacin da hannun har yanzu yana da santimita 15 daga fitilar kai - yanayin sauya fitilar kai yana canzawa lokacin da mai amfani bai yi niyya ba. Muna daidaita na'urorin auna motsinmu ta hanyar amfani da taga ganowa ta 6-12 cm a yanayin zafi da matsin lamba na yau da kullun, kuma muna gwada samfurin na'urar daga kowace rukunin samarwa a cikin ɗakin tsayi (wanda ke kwaikwayon mita 4,500) don tabbatar da cewa matsakaicin nisan ganowa ya kasance ƙasa da santimita 15 a tsayi.
Don kwatanta kunna firikwensin motsi a cikin kewayon samfurinmu,Shafin fitilar firikwensinyana lissafa ƙayyadaddun bayanai na ganowa ga kowane samfuri. Don bambance-bambancen lumen masu girma ba tare da firikwensin motsi ba, dubaNau'in fitilar fitila mai haske.
5. Manyan Kayan Aiki — Dokokin Baturi, MOQ, da Marufi ga Masu Gudanar da Yawon Bude Ido na Kudancin Amurka
Fitilun kai masu sake caji suna ɗauke da ƙwayoyin batirin lithium-ion (yawanci sel 1,200–2,000 mAh 18650 don samfurin 600LM). Ana tsara jigilar batirin lithium-ion daga China zuwa Kudancin Amurka a ƙarƙashin UN3481 (batura lithium-ion da ke cikin kayan aiki). Dole ne a aika fitilar kai tare da batirin da aka sanya a cikin na'urar - ba za a iya jigilar batirin da ba su da kyau a cikin kwali ɗaya ba. Dole ne yanayin cajin batirin ya kasance ƙasa da kashi 30% don jigilar iska (bisa ga IATA DGR 2026, Sashe na II na PI967) don rage haɗarin gobara yayin jigilar kaya. A Mengting, muna jigilar kowace fitilar kai tare da sanya batirin a yanayin caji 30%, kuma mun haɗa da alamar UN3481 akan kwalin jigilar kaya. Masu aikin yawon bude ido waɗanda suka yi oda ta hanyar jigilar kaya ta teku (kwanaki 40-60 suna tafiya daga Ningbo zuwa Callao, Peru) suna karɓar fitilar kai tare da batirin a kashi 30% na SOC, kuma fitowar batirin da kansa a cikin kwanaki 60 ya ragu zuwa kashi 20-25% na SOC - har yanzu ya isa don amfani na farko amma ya kamata su yi caji gaba ɗaya kafin a ba su ga abokan ciniki.
Adadin oda na yau da kullun ga mai yawon buɗe ido na Kudancin Amurka shine raka'a 200-500 a kowace samfuri a kowace shekara - samfuri ɗaya don yin yawo na yau da kullun (LED mai lamba 600LM dual-LED), zaɓi ƙaramin samfuri don shirye-shiryen yara da kuma samfurin lumen mai girma (1,000LM) don jagororin rami na musamman. MOQ a Mengting don samfurin firikwensin motsi na 600LM dual-LED shine raka'a 100 a kowace launi. Ga odar OEM/ODM tare da tambarin mai gudanar da yawon buɗe ido da aka buga a kan gidan fitilar kai da marufi na musamman (akwatin kwali mai alama tare da umarnin tafiya na mai aiki da aka buga a cikin murfi), MOQ shine raka'a 500 a kowace samfuri kuma kuɗin kayan aiki na stencil mai lamba siliki shine $180. Muna ajiye stencil mai lamba siliki a fayil don sake yin oda, don haka oda ta biyu ba ta da kuɗin kayan aiki. Marufi ga masu aiki a Kudancin Amurka yawanci ya haɗa da katin umarni mai harsuna biyu (Spanish + Turanci), kebul na caji na micro-USB (kebul ɗin na kowa ne, amma muna gwada kowace kebul don wutar caji ta 500 mA akan da'irar caji ta fitilar kai don guje wa matsalolin daidaitawa da adaftar USB na Kudancin Amurka 220V/60Hz zuwa 5V waɗanda abokan ciniki ke kawowa daga ƙasashe daban-daban).
Shafin samfurin don cikakken tarin samfurin yana nanKayayyakin waje na MTDon yanayin aikace-aikacen da suka haɗa da zango, hawan dutse, da kuma yin kogo na ƙwararru, dubaShafin yanayin aikace-aikacen fitilar kai.
Ana kiyaye ƙa'idodin yawon buɗe ido na duniya da mafi kyawun ayyuka don kayan aikin balaguro ta hanyarƘungiyar Kasuwanci ta Tafiya ta Kasada, wanda ke wallafa jagororin kayan aiki ga masu gudanar da balaguron kasuwanci a duk sassan kasada, gami da tafiya a kan tafiye-tafiye, kogo, da tafiye-tafiyen dazuzzuka. Don ƙa'idodin fasaha na musamman ga fitilar gaba,Ƙungiyar Hawan Dutsen Ƙasa da Hawan Dutsen Ƙasa ta UIAA (Ƙungiyar Hawan Dutsen Ƙasa da Ƙasa)yana kula da shawarwarin tsaro don hasken wutar lantarki mai ɗaukuwa a tsaunuka da wuraren kogo.
Tambayoyin da Ake Yawan Yi
Menene lokacin aiki na fitilar kai mai ƙarfin lumen 600 da za a iya caji a matsakaicin yanayi?
A yanayin haske mai matsakaicin matsakaici (kimanin kashi 40% na matsakaicin fitarwa, wanda shine lumens 240 daga ma'aunin ANSI), lokacin aiki na fitilar LED mai dual-LED 600LM tare da tantanin lithium-ion mai 1,500 mAh 18650 shine awanni 8-10. A yanayin zafi (lumens 600), lokacin aiki shine awanni 3.5-4. A yanayin zafi mai ja a ƙaramin ƙarfi (lumens 5), lokacin aiki ya wuce awanni 40. Ana auna waɗannan lambobi a cikin dakin gwaje-gwajenmu a yanayin zafi na 20°C - a yanayin zafi na dare na Andean na 0-10°C, ƙarfin tantanin lithium-ion yana raguwa da kashi 15-20%, don haka lokacin aiki na matsakaici yana raguwa zuwa awanni 6-8. Ina ba da shawarar masu yawon buɗe ido su ɗauki tantanin 18650 na kowane jagora don tafiye-tafiye na kwanaki da yawa kuma su umurci abokan ciniki da su yi amfani da yanayin matsakaici don kewaya hanya kuma su canza zuwa yanayin ja a sansanin.
Za a iya amfani da fitilar kai da safar hannu - firikwensin motsi da aikin maɓalli?
Eh - na'urar firikwensin motsi tana aiki ba tare da cire safar hannu ba saboda tana gano hasken infrared na zafi na hannun ta hanyar safar hannu. A kauri na safar hannu na yau da kullun (ulu ko ulu 0.5–2.0 mm), siginar zafi tana ratsawa zuwa na'urar firikwensin PIR ba tare da raguwa mai mahimmanci ba - na'urar firikwensin tana yin rikodin motsin hannu a nisan 6-10 cm ba tare da la'akari da kayan safar hannu ba. Hakanan ana iya sarrafa maɓallin zahiri (wani ƙaramin makulli mai rufe silicone wanda ke saman gidan) ta hanyar safar hannu - diamita na maɓalli shine 10 mm tare da ƙarfin kunnawa na 12 N, wanda ya isa ƙasa don matsawa ta hanyar safar hannu mai nauyi amma tsayinsa ya isa don guje wa kunnawa ba zato ba tsammani lokacin da fitilar kai take cikin akwatin. Maɓallin yana cikin mm 2 a ƙasan saman gidan don hana goga ko mayafin fakitin matse shi yayin jigilar kaya.
Menene garantin fitilun MT na waje don masu gudanar da yawon buɗe ido da yawa?
Garantinmu na yau da kullun don odar B2B mai yawa shine watanni 12 daga ranar isarwa zuwa tashar shiga. Garantin ya shafi gazawar LED (LED ɗin dole ne ya riƙe kashi 70% na fitowar lumen na farko a cikin watanni 12, wanda aka auna a kowace LM-80 - muna gwada samfurin daga kowane rukunin samarwa a tazara ta sa'o'i 1,000), lalacewar ƙarfin baturi (batir dole ne ya riƙe sama da kashi 80% na ƙarfin farko a cikin watanni 12 da zagayowar caji 300), aikin firikwensin sauyawa da motsi (firikwensin dole ne ya kunna a cikin tagar gano kayan masana'anta), da kuma ingancin hatimin hana ruwa shiga (babu wani danshi da ake gani a cikin gidan ruwan tabarau bayan watanni 12 a cikin marufi da aka rufe). Garantin ba ya rufe lalacewar jiki sakamakon faɗuwar fitilar kan dutse (ruwan tabarau na iya fashewa akan tasiri mai kaifi), lalacewar kebul daga jan mahaɗin micro-USB a kusurwa (>45° damuwa mai jan hankali daga axis), ko shigar ruwa daga nutsewa fiye da zurfin IPX6 (an gwada fitilar kan zuwa IPX6 - jiragen ruwa masu ƙarfi - amma ba a tsara shi don nutsewa da gangan ba).
Ta yaya zan tabbatar da ƙimar fitilar ANSI FL1 lumen kafin in yi odar babban kaya?
Nemi rahoton gwajin ANSI FL1 na masana'anta daga dakin gwaje-gwaje na ɓangare na uku. Rahoton gwajin dole ne ya nuna ƙimar lumen da aka auna a daƙiƙa 30 da kuma a mintuna 2 na ci gaba da aiki, nisan hasken a cikin mita (wanda aka auna inda ƙarfin hasken ya faɗi zuwa 0.25 lux), lokacin aiki a cikin mintuna zuwa 10% na fitowar lumen na farko, da kuma sakamakon gwajin ƙimar IPX (fitilar kan gaba dole ne ta yi aiki daidai bayan gwajin ruwa). A Mengting, kowane rukunin samarwa ya haɗa da samfura 5 da aka aika zuwa dakin gwaje-gwajen da CNAS ta amince da shi (Sabis na Tabbatar da Ƙasa na China, amincewa da juna tare da ILAC) don tabbatar da ANSI FL1, kuma an ba da rahoton gwajin tare da takaddun jigilar kaya na rukuni. Idan masana'anta ba zai iya bayar da rahoton gwaji na ɓangare na uku ba, ƙimar lumen akan marufi kimantawa ce ta talla - ba lamba da aka auna ba - kuma ainihin fitarwa na iya zama ƙasa da 20-40% fiye da da'awa.
Kuna bayar da sabis na musamman na lakabi ko sabis na OEM ga masu gudanar da yawon shakatawa na Kudancin Amurka?
Eh — sabis ɗin OEM ɗinmu ga masu yawon buɗe ido ya haɗa da: tambarin mai aiki da siliki a kan wurin fitilar kai (wuri ɗaya, har zuwa launuka biyu, matsakaicin girman tambarin 12 mm × 8 mm), marufi na musamman tare da umarnin alamar mai aiki da tafiya, katin farawa mai sauri na harsuna biyu (Spanish + Turanci ko Fotigal + Turanci), da kuma SKU na musamman da aka bai wa mai aiki don sake yin oda. MOQ na odar OEM raka'a 500 ne a kowane samfuri. Kudin kayan aiki na stencil na siliki shine $180 don oda ta farko kuma an yafe shi akan oda mai maimaitawa. Lokacin jagora na odar OEM shine kwanaki 35-40 daga amincewa da samfurin. Don odar da ba ta da alamar kasuwanci ta yau da kullun, lokacin jagora shine kwanaki 20-25 bayan tabbatar da ajiya.
Wadanne takaddun shaida ne fitilar LED mai dual-LED 600LM ke ɗauke da su don jigilar kaya zuwa ƙasashen waje?
Fitilar mu ta 600LM tana ɗauke da takaddun shaida masu zuwa: CE (Tarayyar Turai - fitilar ta cika Umarnin Daidaita Wutar Lantarki na 2014/30/EU da Umarnin RoHS na 2011/65/EU don abubuwan da aka takaita), FCC (Amurka - Sashe na 15B don masu radiators ba da gangan ba), da UN38.3 don batirin lithium-ion (tantanin ya wuce kwaikwayon tsayi, gwajin zafi, girgiza, girgiza, gajeriyar da'ira ta waje, tasiri, caji fiye da kima, da gwaje-gwajen fitarwa da ake buƙata don jigilar iska ta hanyar Umarnin Fasaha na ICAO). Takardun takaddun shaida an haɗa su tare da jigilar rukuni. Ga masu aiki waɗanda ke buƙatar ƙarin takaddun shaida na musamman na ƙasa (kamar ANATEL don Brazil), za mu iya shirya gwaji da takaddun shaida akan ƙarin farashi na $1,200–$2,000 kowace ƙasa, tare da lokacin jagora na makonni 8-12.
Lily
Daraktan Fasaha — MT Hasken Waje
Tare da shekaru 15+ a fannin hasken wutar lantarki a waje, ta ƙware a fannin bincike da haɓaka hasken fitilar LED, sarrafa zafi da ƙirƙirar kayayyaki. Lily tana jagorantar ƙungiyar bincike da haɓaka kayayyaki a Ningbo Mengting Outdoor Products Co., Ltd. kuma ta kula da haɓaka samfuran fitilun fitila sama da 60, daga ƙananan na'urori masu amfani da AAA zuwa fitilun bincike masu ƙarfi. Tana aiki akai-akai tare da masu gudanar da yawon shakatawa na kasada don fassara ra'ayoyin filin zuwa inganta samarwa.
Lokacin Saƙo: Yuli-09-2026
